The addition of a insertion in the rubber (either cloth or nylon) increases the tensile strength and tear resistance of the rubber sheet. Please see below details for commercial (SBR), Neoprene and Nitrile rubber insertion materials.

Other grades are available with multiple insertions - Please contact us for full details

COMMERCIAL (SBR) GRADE WITH 1 PLY INSERTION



General purpose grade with cloth insertion meets the following specification

Grade : SBR

Colour : Black

Surface finish : Smooth / Smooth

Shore Hardness : 70° +/- 5°

Density : 1.50

Min Temperature : -20°C

Max Temperature : +70°C

Tensile Strength : 3.0 MPa

Abrasion Resistance : 350 mm³

Elongation at Break : 150

Supplied in rolls and in thicknesses from 1.0mm to 25mm 

NEOPRENE RUBBER WITH 1 PLY INSERTION

General purpose grade with cloth insertion meets the following specification

Grade : Neoprene

Colour : Black

Surface finish : Smooth / Smooth

Shore Hardness : 60° +/- 5°

Density : 1.30

Min Temperature : -20°C

Max Temperature : +90°C

Tensile Strength : 5.0 MPa

Abrasion Resistance : 300 mm³

Elongation at Break : 250

 Supplied in rolls and in thicknesses from 1.0mm to 25mm 

NITRILE RUBBER WITH 1 PLY INSERTION

General purpose grade with cloth insertion meets the following specification

Grade : Neoprene

Colour : Black

Surface finish : Smooth / Smooth

Shore Hardness : 60° +/- 5°

Density : 1.30

Min Temperature : -20°C

Max Temperature : +90°C

Tensile Strength : 5.0 MPa

Abrasion Resistance : 300 mm³

Elongation at Break : 250

 Supplied in rolls and in thicknesses from 1.0mm to 25mm